新闻中心
上海吉都国际贸易有限公司
热线：021-3765 2176
info@guido-tools.com
上海市松江区茸梅路345号3栋
热缩刀柄 DIN 69 893 HSK F
Shrink chuck
DIN 69 893 HSK F
应用：装夹硬质合金与高速钢刀具，直径范围 ø 6 - ø 32mm,柄公差h6；直径 ø 3, 4, 5，柄径公差h4。
Application: For mounting of solid carbide and HSS-cutters ø 6 - ø 32 with h6 tolerance and ø 3, 4, 5 with h4 tolerance
执行：相对于外锥面，刀柄夹持孔的最大跳动量为0.003mm。
Execution: Permissible excentricity difference of the taper to the boring 0,003 mm.
|
Bestell-Nr. Code No. |
HSK-d | d1 | d2 | d3 | l1 | l2 | l3 | g |
| 171.05.071.000 | HSK-F 63 | 3 | 11 | 15 | 80 | 10 | – – | |
| 171.05.071.001 | 4 | 16 | 22 | 80 | 20 | 5 | M 3 | |
| 171.05.071.002 | 5 | 16 | 22 | 80 | 20 | M 4 | ||
| 171.05.071.003 | 6 | 21 | 27 | 80 | 36 | 10 | M 5 | |
| 171.05.071.004 | 8 | 21 | 27 | 80 | 36 | M 6 | ||
| 171.05.071.005 | 10 | 24 | 32 | 85 | 42 | M 8x1 | ||
| 171.05.071.006 | 12 | 24 | 32 | 90 | 47 | M10x1 | ||
| 171.05.071.007 | 14 | 27 | 34 | 90 | 47 | M10x1 | ||
| 171.05.071.008 | 16 | 27 | 34 | 95 | 50 | M12x1 | ||
| 171.05.071.009 | 18 | 33 | 42 | 95 | 50 | M12x1 | ||
| 171.05.071.010 | 20 | 33 | 42 | 100 | 52 | M16x1 | ||
| 171.05.071.011 | 25 | 44 | 53 | 115 | 58 | M16x1 | ||
| 171.05.071.012 | 32 | 44 | 53 | 120 | 62 | M16x1 | ||
扫码关注我们
官方微信
官方网站
CH
EN
021-37652176