上海吉都国际贸易有限公司

S 锯齿粗螺纹

Because of its asymmetrical profile, the buttress thread is well-suited for a high, unilaterally working axial load. The thread is often used in spindle presses, lifting systems and for collet chucks in lathes und milling machines.
The flank angle is 33°

Nominal	Bolt Thread	Tapping
Diameter	Minor Diameter	Drill Size
	mm	mm
S 10 x 2	6.528	7.000
S 12 x 3	6.794	7.500
S 14 x 3	8.794	9.500
S 16 x 4	9.058	10.000
S 18 x 4	11.058	12.000
S 20 x 4	13.058	14.000
S 22 x 5	13.322	14.500
S 24 x 5	15.322	16.500
S 26 x 5	17.322	18.500
S 28 x 5	19.322	20.500
S 30 x 6	19.586	21.000
S 32 x 6	21.586	23.000
S 34 x 6	23.586	25.000
S 36 x 6	25.586	27.000
S 38 x 7	25.852	27.500
S 40 x 7	27.825	29.500
S 42 x 7	39.825	31.500
S 44 x 7	31.825	33.500
S 46 x 8	32.116	34.000
S 48 x 8	34.116	36.000
S 50 x 8	36.116	38.000
S 52 x 8	38.116	40.000
S 55 x 9	39.380	41.500
S 60 x 9	44.380	46.500
S 65 x 10	47.644	50.000
S 70 x 10	52.644	55.000
S 75 x 10	57.644	60.000
S 80 x 10	62.644	65.000
S 85 x 12	64.174	67.000
S 90 x 12	69.174	72.000
S 95 x 12	74.174	77.000
S 100 x 12	79.174	82.000
S 105 x 12	84.174	87.000
S 110 x 12	89.174	92.000
S 115 x 14	90.702	94.000
S 120 x 14	95.702	99.000
S 125 x 14	100.702	104.000
S 130 x 14	105.702	109.000
S 135 x 14	110.702	114.000
S 140 x 14	115.702	119.000
S 145 x 14	120.702	124.000
S 150 x 16	122.231	126.000
S 155 x 16	127.231	131.000
S 160 x 16	132.231	136.000
S 165 x 16	137.231	141.000
S 170 x 16	142.231	146.000
S 175 x 16	147.231	151.000
S 180 x 18	148.760	153.000
S 185 x 18	153.760	158.000
S 190 x 18	158.760	163.000
S 195 x 18	163.760	168.000
S 200 x 18	168.760	173.000
S 210 x 20	175.289	180.000
S 220 x 20	185.289	190.000
S 230 x 20	195.289	200.000
S 240 x 22	201.818	207.000
S 250 x 22	211.818	217.000
S 260 x 22	221.818	227.000
S 270 x 24	228.347	234.000
S 280 x 24	238.347	244.000
S 290 x 24	248.347	254.000
S 300 x 24	258.347	264.000